
MGH-E 16.5/75
PITFORCE | Pit Jack Hanging pit jack with 16500 kg load capacity
VP 454064
Description |
Description:
- Pit jack is track-guided at the upper edge of the pit for easy movement in the working pit
- hanging pit jack for wheel and brake works, as well as removal of smaller components in combination with axle travers and support systems
- Electrohydraulic lift with low-noise oil-immersed units
- Control via separated buttons
- Precision speed control is programmable for lowering operations during difficult installation works
- The lift features a deep-drawn P-carriage for works with axle traverses (alternatively, S-carriage can be supplied)
- For optimal adjustment to the working pit, and to use pit jacks in U-profile without structural modifications, the carriage can be adjusted by 140 mm. The maximum width W is 1080 mm, excess width up to 1200 mm is available as an option
- We can determine the optimal carriage for the pit jack based on a filled in pit dimension sheet
- All rollers feature needle bearings in transverse and longitudinal direction to facilitate easy movement
- Piston rods are hard chromium plated
- A high-quality powder coating offers protection against aggressive liquids and adds to the high-quality aesthetic of the products
Standard Delivery:
- Pit jack with deep-drawn P-carriage
- Standard supports 120 x 120 mm
- Operating manual and test log
- EC conformity certificate CE
- Type tested
Documents |
Technical data |
Load capacity CE | 16500 kg |
Full travel | 750 mm |
Track width inner dimensions | 700 mm - 1080 mm |
Adjustable carriage | 140 mm |
Ram diameter | 90 mm |
Diameter of supports inside/outside | 45 mm / 90 mm |
Operating pressure | 254 bar |
Motor power | 2,5 kW |
Fuse gG | 16 A |
Power supply | 3/N/PE 400 V 50 Hz |
Weight | 305 kg |
Cable length | 5000 mm |
Images |
Request for quotation - MGH-E 16.5/75