MET 6.1 Petrol Tester
MET-SERIES | Emission Tester for Petrol
VP 135117
| Description |
Description:
- Emission tester stands out due to limited weight and compact design
- Short warm-up time, quick measurement readiness
- Accurate analysis of gas components HC, CO, CO2, O2 with lambda value calculation
- Intuitive operation, clear structure in emissions testing process as set out in current guidelines 5 enable minimum cycle times
- Varied and simple network connection options LAN / WLAN (optional)
- The MAHA VCI makes EOBD analysis easy
- Innovative method for separation of condensed water thanks to active water separator
- MID type approval
- Emission testing of CNG, LPG and petrol engines possible
- Options:
- W-LAN interface
Standard Delivery:
- Basic device (gas analyser) in high-quality synthetic casing with integrated display unit and keypad
- Steel mesh emission probe, 600 mm, probe tubing 8 m
- LAN interface with LAN cable
- Power supply unit 110V - 230V, 50/60Hz
- Transparent drain hose for condensed water with collecting tank
- Main filter, zero filter and condensate filter
- Electrochemical O2 sensor
- Trigger tongs for MET 6.1 and 6.3 for inductive RPM measurement at ignition cables
- 2 replacement filters, 2 replacement seals
- Measurement software for continuous measurement without country-specific test procedure
| Documents |
| Technical data |
| Measurable gases | HC, CO, CO2, O2 |
| Measuring principle Infrared spectrometry | HC, CO, CO2 |
| Measuring principle Electrochemical detection | O2 |
| Warm-up time | 0 s |
| Flow | 3,5 l/min |
| Accuracy class | O (OIML) |
| On-board voltage | 10 V / 30 V |
| Power supply | 1/N/PE 110 V/230 V 50 Hz/60 Hz |
| Ambient temperature | 0 °C - 45 °C |
| Operating height | -100 mm - 3000 mm |
| Dimensions total (L x W x H) | 406 mm x 225 mm x 160 mm |
| Weight | 4,6 kg |
| CO - Measurement range / Measured value resolution (max.) | 0 - 15 % Vol. / 0,01 |
| CO2 - Measurement range / Measured value resolution (max.) | 0 - 20 % Vol. / 0,01 |
| HC - Measurement range / Measured value resolution (max.) | 0 - 9999 ppm / 0,1 |
| O2 - Measurement range / Measured value resolution (max.) | 0 - 25 % Vol. / 0,01 |
| Lambda (calculated) | 0,5 - 9,99 / 0,01 |
| Images |
Request for quotation - MET 6.1 Petrol Tester