
MAH-Z 14.5/120
PITFORCE | Axle and Transmission Jack Floor-running telescopic jack
VP 454202
Description |
Description:
- Freely movable floor-running telescopic pit jack for flexible movement to different locations
- Universal jack for lifting high loads and flexible component removal thanks to large travel
- Very flat double telescopic lift for the removal of large components from the vehicle
- Optimal foot control for rapid and power stroke for better control of the load and the pit jack
- Pneumatic quick control facilitates fast post lift to the load uptake point
- Flexible pit jack remote control for installation works and access from both sides of the pit (optional)
- Discharge spindle with dead man's control enables particularly delicate/precise and secure discharge of the pit lift
- Cylinder retraction is both telescopic strokes in also supported through compressed air. This means that vehicles can drive off the pit without obstruction.
- Carriage with four guide rollers, of which two are fitted with brakes to secure against rolling off
- The jack automatically lowers to floor-level at a load of approx. 1000 kg, so as to permanently guarantee underload
- Compressed air maintenance unit with inspection opening for monitoring oil and water levels to maximise the service life of the pit jack
- Inspection window for controlling oil quality and water content in the pit jack
- Protective covers for all control elements, piping, compressed air motors and moveable elements
- Tool storage in the handle
- Piston rods are hard chromium plated, and to prevent rust in the jack, the inside is flushed with hydraulic oil with every complete lift.
- A high-quality powder coating offers protection against aggressive liquids and adds to the high-quality aesthetic of the products
Standard Delivery:
- Pit jack with carriage
- Rapid control and compressed air motor
- Standard supports 120 x 120 mm
- Carriage with four guide rollers
- Operating manual and test log
- EC conformity certificate CE
- Type tested
Documents |
Technical data |
Load capacity CE | 14500 kg |
Lifting height max. | 2090 mm |
Min. load uptake height | 890 mm |
Full travel | 1200 mm |
Carriage (L x W) | 1000 mm x 750 mm |
Ram diameter | 70 mm / 115 mm |
Diameter of supports inside/outside | 45 mm / 70 mm |
Motor max. | 350 l/min 10 bar |
Operating pressure | 223 bar |
Weight | 290 kg |
Images |
Request for quotation - MAH-Z 14.5/120